Wireless connectivity and battery life
The radio decides how fast data moves, what an update costs and how long the battery lasts. These articles work through all three.
For many connected products, two numbers matter most to buyers: how far the device can talk and how long the battery lasts. Both are set largely by the firmware. This section of Field Update covers the radios startups use most (Bluetooth LE, Wi-Fi, LTE-M and NB-IoT cellular, Thread and Matter, LoRaWAN), how to provision and connect devices to a cloud, and how to measure and reduce the current a device draws asleep and awake.
The articles stay close to primary sources and measured numbers. A few examples of the facts they build on: per the Bluetooth SIG, the largest Bluetooth LE data payload grew from 27 octets in Bluetooth 4.0 to 251 octets in 4.2, and Bluetooth 5 added an optional 2M PHY. NB-IoT and LTE-M (3GPP eMTC) are part of 3GPP Release 13. The Matter SDK works over Thread and Wi-Fi network transports. What those facts mean for your device depends on your settings, your phone or carrier, and your duty cycle, which is why the articles show the working.
Radio and power choices also decide how updates behave: how long an image takes to transfer, what it costs on a metered link, and how much battery it uses. Run your own numbers with the battery life calculator, the Bluetooth LE update time calculator and the over-the-air data cost calculator.
For help with the work, see connectivity and low-power design. For products where links and batteries dominate, see industrial IoT and climate and energy.
The articles in this section are listed below with their issue dates.
| Issue | Article and the question it answers |
|---|---|
| Matter over Thread or Wi-Fi: choosing the transport for a new deviceShould our new smart home device use Matter over Thread or Matter over Wi-Fi, and what certification work and cost does each path add? | |
| LTE-M or NB-IoT in 2026: choosing cellular for US deploymentsFor a cellular device deployed in the US, and perhaps abroad, should we design for LTE-M, NB-IoT or both, given current carrier support? | |
| Faster BLE firmware updates: what actually limits the speedWhy do our Bluetooth LE firmware updates take minutes, and which changes on the device and the phone actually make them faster? | |
| Measuring sleep current: tools, setup and the errors that fool youHow do we measure our device's real sleep and average current accurately enough to trust a battery life estimate? | |
| Why battery life falls short of the estimate, and how to close the gapOur battery life estimate said years, but field units die much sooner: what do capacity-divided-by-current estimates miss, and how do we close the gap? |
Send us your board and your plan.
A firmware review reads your schematics, code, flash layout and update plan, and ends with a written plan: what to build first, what could go wrong in the field and how updates will reach your devices.
Or email sales@fumbar.com, or call (720) 675-4202.