Free firmware planning tools that run in your browser
The calculations and checklists we work through in a firmware review, published so you can run them on your own product first.
Key characteristics
- Tools
- 15 calculators, builders, worksheets and checklists
- Runs
- In your browser with nothing sent
- Default values
- A fictional example from the LW-1 soil probe
- Results
- Planning estimates to check on real hardware
Many expensive surprises in a connected product are arithmetic nobody did early enough: a battery that lasts eight months instead of three years, an update image that no longer fits its slot, a rollout that reaches every device before anyone sees that it breaks some of them. The tools on this page do that arithmetic and keep the lists that go with it. They are the same ones we use in a firmware review.
What is here
- Calculators turn a few measured numbers into an estimate: battery life from sleep and wake currents, the cellular data cost of an over-the-air rollout, whether two image slots fit in your flash, how a staged rollout spreads over days, and how long a Bluetooth LE update takes.
- Builders write text you can paste into your release process: release notes, and a version scheme that works for people, for the MCUboot bootloader and for Zephyr.
- Worksheets are editable tables for decisions that need an owner: firmware requirements with a test for each, an RTOS comparison and an update policy.
- Checklists cover the moments where a missed step is costly: board bring-up, each firmware release, the EVT, DVT and PVT build gates, secure boot, and the handover to your own team.
How they work
Every tool runs in your browser. Nothing you type is sent to us or to anyone else, and there is nothing to sign up for. Worksheets and checklists can be downloaded as a CSV file or printed, and builders can be copied or saved as a text file. Entries are not stored, so if you close the page they are gone; download what you want to keep.
The values filled in when a page loads are a fictional example, mostly the LW-1 soil probe from Loamwick, the made-up Denver startup in our example project. They are not measurements from a real product, so replace them with your own numbers.
What the results are
The results are planning estimates. Each page explains how its tool works and where the estimate stops being reliable. A calculator cannot see a leaky voltage regulator, a phone that refuses a short connection interval or a data plan that rounds every session up, so measure on real hardware before you promise anyone a battery life, a data budget or an update time.
When the numbers raise a question the tools cannot answer, that is a good moment to request a firmware review. We read your schematics, code, flash layout and update plan, and send back a written plan with the risks and the order of work. How we work explains what comes after it.
Calculators
Builders
Worksheets
Checklists
Send us your board and your plan.
A firmware review reads your schematics, code, flash layout and update plan, and ends with a written plan: what to build first, what could go wrong in the field and how updates will reach your devices.
Or email sales@fumbar.com, or call (720) 675-4202.