Request a firmware review
Menu
Readers who want to know how Field Update articles are made

How Field Update is written and checked

Field Update is published under one byline, the Fumbar Editorial Team. This page explains who that is, how articles are checked, and what to do if you find a mistake.

Key characteristics

Byline
Fumbar Editorial Team
Sources
Primary sources linked in each article
Software tools
AI writing assistants for research and drafting, every claim checked
Corrections
hello@fumbar.com

Every Field Update article carries the byline Fumbar Editorial Team. Articles are researched, written and edited at Fumbar, the Denver firmware company that publishes Field Update. We do not put individual names on articles: the byline belongs to the company, and the company is responsible for what each article says.

How articles are researched

Field Update writes about things that change: regulations, program status, software release schedules, protocol versions. So we work from primary sources wherever one exists:

  • Regulators and lawmakers’ own pages and texts, such as the U.S. Food and Drug Administration, the Federal Communications Commission, the European Commission and EUR-Lex, NIST and CISA.
  • Standards bodies and industry groups, such as 3GPP and the Bluetooth SIG, and open-source projects such as the Matter SDK.
  • Project documentation for the software we write about, such as Zephyr, FreeRTOS and MCUboot, and chip vendors’ own documentation.

Dates, rule names, version numbers and the status of programs are checked on the source itself, and the date of that check is recorded. Articles link to the sources they rely on. When a fact cannot be confirmed on a primary source, we leave it out or say plainly that it is unconfirmed. Secondary sources such as news stories and vendor blog posts can point us to a primary source, but they are not the basis for a claim.

Software tools and AI writing assistants

We use software tools in research and drafting, including AI writing assistants. They help find and summarize source documents, propose outlines and draft text. They do not decide what is true. Before an article is published, every factual claim in it is checked against the source it cites, and claims that cannot be matched to a source are removed. Calculations in worked examples are redone, many of them with the free tools on this site, so the article and the tool give the same answer.

Fictional examples

Fumbar is a new company and has no client stories to tell. We will not invent them. When an article needs a worked example, it uses one fictional company, Loamwick, and its LW-1 soil probe, with the same names and numbers everywhere on the site. Every such example sits in a box that starts with Example (fictional). Loamwick is not a real company, its probes are not a real product, and nothing in the example describes work Fumbar has done for a client. The whole story is on the example project page.

Issue dates and published dates

Each article shows two dates. The issue date is the article’s month in our editorial calendar. We use it to order articles within each section and across Field Update. The published date is the day the article went online. An issue date earlier than the published date does not mean the article was online in that month. If an article is revised after publication in a way that changes what it says, it also shows an updated date.

Corrections

If you think an article gets something wrong, email hello@fumbar.com with the article’s title, the statement you question and, if you have one, the source that shows the error. We check it against the primary source. If the article is wrong, we correct it and add a dated note at the end saying what changed. We do not quietly rewrite facts.

Regulatory articles describe what the rules say as of the date checked. They are not legal or regulatory advice, and a correction to one of them does not change that.

Independence

Field Update carries no sponsored content, paid placements or affiliate links. Nobody pays to be mentioned, and companies, products and open-source projects named in an article are not Fumbar’s partners or clients.

Fumbar does sell firmware services, and we say so. Where an article touches on work we offer, it links to the relevant service or tool, and you can judge the article knowing that. Our about page explains who we are, and our security page explains how we handle client code and keys.

Send us your board and your plan.

A firmware review reads your schematics, code, flash layout and update plan, and ends with a written plan: what to build first, what could go wrong in the field and how updates will reach your devices.

Request a firmware review

Or email sales@fumbar.com, or call (720) 675-4202.